Table of Contents
Advertisement
2.2.2.4 Ceiling Mount
Procedure
Step 1
Drill holes on the ceiling according to the holes on the junction box.
Step 2
Use 3 ST6.3 expansion screws to fix the junction box to the ceiling.
Step 3
Tighten the screws on the end of the camera to fix it to the junction box.
2.2.3 Installing Anti-smashing Radars
In the vertical direction of the lane, install the anti-smashing radar on the box below the automatic
barrier arm.
Installation and Configuration Manual
Wall mount
Ceiling mount
12
Hide quick links:
Advertisement
Table of Contents
