Setting Rs-485 Led Display - Dahua ITC413-PW4D Series Installation And Configuration Manual

Step 3 Click Connect, and then press the corresponding button the remote controller.
You must press the button in 10 seconds.
Step 4 (Option) To disconnect the remote controller, click Disconnect.
Step 5 Click Save.

4.1.4 Setting RS-485 LED Display

Connect the LED display with the Camera through RS-485, and then you can configure the status,
display type, display color, action, speed, and more parameters of the LED.
Step 1 Select Setting > ITC > RS-485 LED Display.
Installation and Configuration Manual
Remote Controller
26