Wiegand - Dahua ITC413-PW4D Series Installation And Configuration Manual

Parameter
Delete
Clear
Step 4 Click Save.
4.1.5.3 Volume/Encoding Settings
Configure the volume for voice broadcast.
Only available for selected models.
Procedure
Step 1 Select Setting > ANPR > Voice Broadcast Settings > Volume/Encoding Settings.
Step 2 Configure the parameters.
Parameter
Input Volume
Audio Output Type
Output Volume
Voice Speed
Step 3 Click Save.

4.1.6 Wiegand

The camera is built with a wiegand module, which can be straightly connected to access control devices
through Wiegand 26 bit protocol. No operation on the camera webpage is needed.
Description
Click next to the broadcast option to delete the option.
Delete all broadcast options.
Volume/Encoding
Table 4-4 Parameter description
Description
The volume of the sound received by the camera.
Where the voice broadcast will be produced.
● Camera Audio Output: The voice broadcast will be played by the
device connected to the audio output port of the camera.
● Camera Speaker: The voice broadcast will be played by the
speaker of the camera.
The volume of the voice broadcast.
The speed for the voice broadcast.
31
Installation and Configuration Manual