Configuring Voice Broadcast - Dahua ITC413-PW4D Series Installation And Configuration Manual

Section
Step 3 Click Save.

4.1.5 Configuring Voice Broadcast

You can configure the broadcast content for events, voice broadcast content when vehicles pass, and the volume
and video encoding settings for the broadcast.
4.1.5.1 Event Broadcast Settings
Configure the broadcast content when events are triggered.
Step 1 Select Setting > ANPR > Voice Broadcast Settings > Event Broadcast Settings.
Step 2 Configure the parameters.
Parameter Description
Passing Appears The display duration of the passing vehicle information
On-screen for on the screen.
● Ambient Adaptive: The LED adjusts its brightness
Brightness
Adjustment
● Manual: Manually adjust the LED brightness by
● Auto: Set the time interval for the LED to do self-
Self Check
● Never: The LED does no self-check.
28
Installation and Configuration Manual
according to the ambient brightness. Set the
Augment Brightness, the higher the value, the
bigger the brightness change.
setting the Intensity.
check.