Table of Contents
Advertisement
8.
If removing an optical drive, disconnect the power cable (1) and data cable (2) from the rear of
the optical drive.
CAUTION:
avoid damaging the cable.
Figure 4-20
9.
Rotate the drive cage back down to its normal position.
CAUTION:
Figure 4-21
ENWW
When removing the cables, pull the tab or connector instead of the cable itself to
Disconnecting the Power and Data Cables
Be careful not to pinch any cables or wires when rotating the drive cage down.
Rotating the Drive Cage Down
Installing and Removing Drives 111
- Quick Links:
- Standard Configuration Features
Hide quick links:
Advertisement
Table of Contents
