HP 6200 Pro Microtower Series Hardware Reference Manual page 39

Hide thumbs Also See for 6200 Pro Microtower Series:
Table of Contents

Advertisement

11.
To install a new expansion card, slide the bracket on the end of the card down into the slot on
the back of the chassis and press the card down firmly into the socket on the system board.
Figure 2-12
NOTE:
connector seats properly in the expansion card slot.
12.
Close the expansion card retention latch, making sure that it snaps firmly into place.
13.
Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
14.
Replace the computer access panel.
15.
Reconnect the power cord and turn on the computer.
16.
Lock any security devices that were disengaged when the computer access panel was removed.
17.
Reconfigure the computer, if necessary.
ENWW
Installing an Expansion Card
When installing an expansion card, press firmly on the card so that the whole
Removing or Installing an Expansion Card
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8200 elite microtower series8200 elite small form factor series8200 elite ultra-slim desktop series8200 elite convertible minitower series6200 pro small form factor seriesXz779ua ... Show all

Table of Contents