Connecting The Power Cord - HP Linux workstation x1100 Getting Started Manual

setting up and using your workstation
setting up your hp workstation x1100
WARNING
20

connecting the power cord

For your safety always connect equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug,
such as the one provided with the equipment, or one in
compliance with your national safety standards. This equipment
can be disconnected from the power by removing the power cord
from the power outlet. This means the equipment must be
located close to an easily accessible power outlet.
1. Connect the power cords to the rear of the monitor and the computer.
(The connectors are shaped to go in one way only.)
2. Connect the monitor's power cord and the computer's power cord to a
grounded outlet.
Chapter 1