HP 6200 Pro Microtower Series Hardware Reference Manual page 44

●
To remove a hard drive from one of the two lower internal hard drive bays, pull up on the
green hard drive drivelock mechanism (1) for that drive and slide the drive from the drive
bay (2).
Figure 2-19
●
To remove a hard drive from the upper internal hard drive bay, remove the screw on the
side of the bay that secures the drive in place (1), then slide the drive out of the bay (2).
Figure 2-20
36 Chapter 2 Convertible Minitower (CMT) Hardware Upgrades
Removing a Hard Drive from the Lower Two Bays
Removing a Hard Drive from the Upper Bay
ENWW