5.1.7 Canister calibration
In this menu the canisters can be calibrated.
The calibration determines the quantity of the ingredient when a canister motor runs at a
defined speed for a defined time.
When finished the measured weight must be filled in.
Necessities:
• empty cup
• precision scale
5.1.7
5.1.7a
5.1.7b
Canister calibration procedure:
• press "canister calibration" to confirm
• press or to scroll through the maintenance menu
Make sure all necessities are available.
• press to go to the next screen
Canister selection:
► The number of canisters may vary per configuration, see
§7.3 on p.106.
• press or to select a canister (if more than one)
• press to confirm and go to the next screen
• press to go to the next screen
• press to go to the previous screen
33