Table of Contents
Advertisement
4. Software update instructions
►The update will overwrite all software, including all personal settings (the
water and grinder calibration values remain unchanged).
Necessities:
• Windows device (windows 7 or later)
• USB cable (USB-A to USB-C)
• torx 10 screwdriver
► USB-C to USB-C does not work.
24
• download the zip-file from our website
• extract the file to a folder
• right-click on the file to open its properties
• check the "unblock" box
• click 'OK' to confirm
► The Sprso must be connected to the mains.
• start the application, the screen on the left
will appear followed by the next screen
Preparation of the Sprso:
• remove the screw from the brand name
buckle
• remove the brand name buckle
(the USB-C connection becomes available)
• plug in the USB-C cable on the Sprso
• plug in the USB-A cable on the windows
device
Advertisement
Table of Contents
