JRC INMARSAT FleetBroadband FB250 Operation Manual page 76

5. How to use the telephone/FAX
Dial-up procedure for forced setting of service type
Just adding or
FAX) to TEL1/2 port, regardless of setup done at [8.9.2.1 Port Cont setting item selection menu
(p113)].
This is temporal setting, and available for only transmission (ship to shore).
Table 5.2b. Dial-up procedure of the JUE-250, for forced setting of each service type
Setting Voice service (4kbps Voice) to TEL1/2 port
■ Regular calling
■ Speed Dialing
■ Redial calling
■ Secret Code calling Secret Code
Setting FAX service (3.1kHz Audio FAX) to TEL1/2 port
■ Regular calling
■ Speed Dialing
■ Redial calling
■ Secret Code calling Secret Code
The contents of above-mentioned table are the same as the one of the second page of this chapter, table 5b.
on the head of dialing sequence, user can easily set the service type (Voice or
00 Country Code Area Code Subscriber's number
Speed Dialing number
00
00 Country Code Area Code Subscriber's number
00 Country Code Area Code Subscriber's number
Speed Dialing number
00
58
00 Country Code Area Code Subscriber's number