Satellite Menu; Satellite Display; Spot Beam Id Display - JRC INMARSAT FleetBroadband FB250 Operation Manual

8.3 Satellite menu

In this menu, user can display the status of satellite including ocean region, and spot beam No.
Refer to Appendix [A.5 Satellite menu], when GYRO is used.
Top menu screen
1 Sta t u s
2 S M S
3 S a t e l l i t e
4 P h o n e B o o k
5 R e d i a l
6 C a l l L o g
7 S e l f Te s t
8 Al a r m P a c k
9 ADMIN
0 SERVICE

8.3.1 Satellite display

In this menu, satellite can be changed. Currently selected satellite is denoted by "*".
Select the preferred satellite and press
"AUTO" is chosen.
3 S a t e l l i t e
4 P h o n e B o o k
1 S a t e l l i t e
2 Spot Beam
Fig. 8.3.1 Satellite selection screen

8.3.2 Spot Beam ID display

In this menu, user can display the ID of Spot Beam.
3 S a t e l l i t e
4 P h o n e B o o k
1 S a t e l l i t e
2 Spot Beam
OK
Press button
in any screen.
Fig. 8.3 Satellite menu screen
OK button. The JUE-250 will search the most suitable satellite if
Satellite display screen
AUTO
*AMER W98.0
OK
APAC E143.5
EMEA E25.0
Spot Beam ID display screen
Spot Beam:
OK
128
Fig. 8.3.2 Spot Beam ID display screen
97
8. Handset Menu system
Satellite menu screen
1 S a t e l l i t e
2 Spot Beam
( MENU+ 3 +1 )
*Handset will display the suitable satellites
from the operating satellites.
AMER W98.0 (America satellite)
APAC E143.5 (APAC satellite)
EMEA E25.0 (EMEA satellite)
( MENU+ 3 +2)
( MENU+ 3 )