Setting Service Type (Admin User Only) - JRC INMARSAT FleetBroadband FB250 Operation Manual

4.2.2 Setting service type (ADMIN user only)

In this section, setting the Service types for [TEL1] and [TEL2] ports are explained.
Select the Service type of the port with following the terminal device (telephone or FAX) being
connected to each port.
Open [9 ADMIN menu] by the sequence of [4.2.1].
Select [2 Port Cont] menu, then [ Port Cont setting item selection menu] will open.
Select the port from [TEL1] /[TEL2], and select the service type from [VOICE] (for telephone), or
[FAX], and then press OK
APAC E143.5
14:03 UTC
READY
8 Alarm Pack
9 ADMIN
2 Port Cont
Enter the
3 P o r t
Secret code.
2 TEL1
3 TEL2
button. The screen returns to [Port Cont setting item selection] screen.
I dle screen
Press
Top menu screen
Select [9 ADMIN] and press
ADMIN menu screen
READY
Select [2 Port Cont] and press
0 0 0 m 0 0 s
Port Control menu screen
READY
2 Vo l u m e
3 Ty p e
READY
VOICE
F A X
CS PS READY
Fig. 4.2.2 Setting service type menu
37
MENU button, then TOP menu opens.
Select [2 TEL1] or [3 TEL2] and press
Port Cont setting item selection screen
Select [3 Type] and press
Service type setting screen
Select [VOICE] or [FAX] and press
4. Getting started
OK button.
OK button.
OK button.
OK button.
OK button.