Chg Pin1Menu - JRC INMARSAT FleetBroadband FB250 Operation Manual

8.9.6.1 Chg PIN1 Menu
In this menu, the user can change the Personal Identification Number (PIN), which is necessary for
SIM card operation.
(To operate this menu, user should set PIN Input to [Enable] in [8.9.6.2 PIN Input setting menu (p126)],
preliminarily.)
PIN changing procedure
1) Select [1 Chg PIN1] and press OK, then SIM PIN1 input screen is displayed. Input existed PIN
(4-digit) and press OK
2) New PIN input screen is displayed. Input new PIN and press OK.
3) New PIN retype screen is displayed. Retype new PIN again and press OK.
About releasing method of PIN locking (it occurs when the input error exceeds three times), refer to
[Releasing PIN locking and new PIN setting procedure (p127)].
8 Alarm Pack
9 ADMIN
5 Auto DCN.
6 SIM Menu
1 Chg PIN1
2 PIN Input
ＯＫ
Error
5 Auto DCN.
6 SIM Menu
Returns to ADMIN Menu, even the
SIM PIN1 is incorrectly entered.
Fig.8.9.6.1 Chg PIN1 menu (changing procedure of PIN)
(entered figures are hidden by ****).
SIM PIN1 input screen
ＯＫ
SIM PIN1?
When[PIN Input] is set
to [Disable]
Input is
succeeded
ＯＫ
Error
125
PIN input limitation number
ＯＫ
3
****
New PIN retype screen
Retype PIN?
****
No limitation of input
ＯＫ error.
8. Handset Menu system
MENU+ 9 +6+1）
New PIN input screen
New PIN?
****
ＯＫ
！