Handset; Making A Call/Answering The Phone - JRC INMARSAT FleetBroadband FB250 Operation Manual

5. How to use the telephone/FAX

5.1 Handset

5.1.1 Making a call / Answering the phone
Making a call
Hook off the Handset and press the number followed by
When the party answers the call, [Communication screen] is displayed . Converse with the party.
Return Handset to the cradle when the telephone call ends. [Disconnection screen] is displayed for
15 seconds with Cause Code and duration of communication. After the call has been completed,
the display returns to [Idle screen].
APCA E143.5
14:03 UTC
1 2 3 4 5 6 7 8 9 0 ＃
HDST-VOICE
After 15 seconds, the screen
returns to [Idle screen]
Fig.5.1.1a Flow of making a call
■Dial-up procedure
Example) Placing a call to +81422-45-9111 in Japan→0081422459111
Answering the phone
If the JUE-250 receives a call, ring tone will sound and the screen
changes to [Arrival screen].
Take up the Handset from the cradle, then you can talk with the
party. The screen will change to [On communication screen].
After the disconnection, return the Handset to the cradle.
Voice of landside might be distorted or interrupted if the JUE-250 is used under a remarkably noisy
environment, for example, in a small and high-speed ship.
Idle screen
[Idle screen] is displayed when Handset is placed on the cradle, and
[Dial-waiting screen] is displayed when Handset is off-hooked.
In dialing, do not forget to press
Dial-up screen
If the total digit of telephone number exceeds 10, first several
digits are not displayed.
READY
On Communication screen
1 m 2 1 s
Elapsed time of communication is continually shown
COMM(SND)
until the call is disconnected.
"m" stands for minute(s), "s" stands for second(s).
1 m 2 5 s
Code:0010
CS PS READY
00 Country Code Area Code Subscriber's Number
NOTE
42
# button.
# in the end.
Communication terminated screen
Return the Handset to the cradle. The total duration is
displayed on the right of the first line, and the Cause
Code is displayed on the second line.
*Cause Code: 4-digit code. Identities the cause of
disconnection (refer to [Appendix H Cause Code],
p157)
Fig.5.1.1b Arrival screen
＃
Ring
COMM(RCV)