Connecting Terminals And Power On; Connecting Terminals With Cables - JRC INMARSAT FleetBroadband FB250 Operation Manual

4. Getting started

4.1 Connecting terminals and power on

4.1.1 Connecting terminals with cables

FAX
Use straight Ethernet cable when you connect Ethernet port with your PC, unlike JUE-33/410F
uses cross Ethernet cable.
Connecting terminal telephone and FAX to TEL1/2port
Connect terminal telephone/FAX to TEL1 and TEL2 port with 2 wire, 6-PIN modular cable (RJ-11
type).
Connecting Handset to Handset port
Connect adapter of Handset to Handset port.(12-PIN modular cable)
PC connected
TEL
to USB port
Fig.4.1.1 The Cable connection of each terminal
28
PC(s) connected
with Ethernet port
(Connection is depending
on the Terminal Adaptor)
Note
GYRO I/F
Box
TEL