Table of Contents
Advertisement
Appendix A Changing procedures of using GYRO tracking
A.2 Procedure of setting GYRO tracking system (Corresponded to Chapter 8.9.1.4)
Procedure of changing tracking system from [Auto](signal tracking) to [GYRO(NSK)] or
[GYRO(NMEA)] is described in this chapter.
(In JUE-250, the tracking system is easily changed from Handset, although setting of dip switch must
be changed in JUE-33).
Top menu screen
1 Sta t u s
2 S M S
3 S a t e l l i t e
4 P h o n e B o o k
5 R e d i a l
6 C a l l L o g
7 S e l f Te s t
8 Al a r m P a c k
9 ADMIN
0 Service
Fig.A.2 Procedure of setting GYRO tracking system
ADMIN menu screen
1 Setup
2 Port Cont
3 Port
4 User Reg.
5 Auto DCN.
6 SIM Menu
ＯＫ
Setup menu screen
1 Delivery
2 Local Time
3 LED
4 Tracking
136
Tracking setting screen
(Setting when SYNC type or Step type
GYRO is used)
AUTO
ＯＫ
GYRO
GYRO type setting screen
ＯＫ
SYNC/STEP
NMEA
Only 4.8kbps is supported for the NMEA
Changed
ＯＫ
Advertisement
Table of Contents
