Symbols Used On The Control Panel; Symbols Used On The Control Display Screens - COMAC agila bto Use And Maintenance Manual

SYMBOLS USED ON THE CONTROL PANEL

5
4

SYMBOLS USED ON THE CONTROL DISPLAY SCREENS

The control screen is divided in:
1. Symbol of the reverse movement selector: indicates the switch that
1
2. Control display: is a digital display that enables the parameters set in the
3. Machine main switch symbol: indicates the key switch that enables the
2
4. Traction motor potentiometer symbol: indicates the knob that enables the
3 5. Symbol for ECO-MODE program: indicates the switch that enables the
The adjacent image identifies the WORK PANEL screen, the icon in the top right corresponds to the charge
level of the batteries
The adjacent image identifies the SCRUBBING WITH DRYING work screen with the STANDARD working
mode active. The symbol in the middle of the screen identifies the type of work being carried out. In this
case, both the brush head unit and the squeegee unit are in contact with the ground.
The adjacent image identifies the SCRUBBING WITH DRYING work screen with the ECO-MODE working
mode active. The symbol in the middle of the screen identifies the type of work being carried out. In this
case, both the brush head unit and the squeegee unit are in contact with the ground.
The adjacent image identifies the SCRUBBING WITHOUT DRYING work screen with the STANDARD
working mode active. The symbol in the middle of the screen identifies the type of work being carried out.
In this case, only the brush head body is in contact with the ground.
The adjacent image identifies the SCRUBBING WITHOUT DRYING work screen with the ECO-MODE
working mode active. The symbol in the middle of the screen identifies the type of work being carried out.
In this case, only the brush head body is in contact with the ground.
The adjacent image identifies the DRYING work screen with the STANDARD working mode active. The
symbol in the middle of the screen identifies the type of work being carried out. In this case, only the brush
head body is in contact with the ground.
enables the reverse function to be activated.
machine during its use to be viewed.
machine to be activated or deactivated.
potentiometer associated with the traction motor to be adjusted.
ECO-MODE working mode to be activated.
10