Hunter TCX50H Series Operation Manual page 26

Press the wheel rotation pedal to rotate the wheel clockwise.
Remove the bead lever tool from the tire when it easily slides out, approximately after a
quarter rotation of the wheel.
Continue to press the wheel rotation pedal to rotate the wheel clockwise until the
entire bead is lifted from the rim.
Lift tire and repeat this procedure for lower bead.
Lift the mount/demount arm assembly up and away from the wheel.
Remove tire from rim.
For additional information on demounting special wheels, refer to "Advanced Demounting
Procedures," page 32.
26 Operation Instructions for TCX50H Tire Charger