SECTION 6 - ACCESSORIES
Safety Precautions
DO NOT OVERLOAD PLATFORM.
• Ensure no personnel are beneath platform.
• This factory-installed option is available only on specified
models.
• Keep lanyard attached at all times.
• Do not use electrical tools in water.
• Use correct voltage for tool being used.
• Do not overload circuit.
Preparation and Inspection
• Ensure generator is secure.
• Check condition of belt and wiring.
Operation
Start the engine, then turn on the generator.
See the Miller Generator Technical Manual (PN 3121677) for more
information.
6-10
6.6
SKYWELDER™
SkyWelder™ is capable of TIG and Stick welding, producing 200
Amps at 100% duty cycle or 250 Amps at 50% duty cycle. This
accessory receives power from the SkyPower™ system.
3121615