Photocell Sensitivity; Led String Adjust - Raytec VARIO2 iPPoE Series Full Installation And Setup Manual

Photocell Sensitivity

The photocell switch-on level can be altered using the slider bar.
Levels are:
Factory Default:
There is a high level of hysteresis and an in-built delay incorporated to avoid
switching ON / OFF in marginal lighting conditions.

LED String Adjust

This may be required to adjust diagnostics feedback under certain circumstances
Please see the Diagnostics section for details.
Factory Default:
raytecled.com
40
Minimum level =
Maximum level =
20 lux
Disabled
5 lux
65 lux
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990