Raytec VARIO2 Lite Series Installation Manual
Hide thumbs
Also See for VARIO2 Lite Series:
- Full installation and setup manual (60 pages) ,
- Installation manual (36 pages) ,
- Quick setup instructions manual (21 pages)
Advertisement
Installation Guide
VARIO2 w16
VARIO2 i16
Contents
Page 1-2
Page 2
Page 3
Page 5
Page 6
Page 7-8
Box Contents
VARIO2 LITE Illuminator, spare 60° beam angles ILS
(ILS: Interchangeable Lens System)
Accessories (Optional): 80˚ beam and 120˚ beam angle ILS; Bracketry
VARIO2 Enhancements
•
Increased Distance
2
LITE
VARIO2 w8
VARIO2 i8
Box Contents and Safety Information
Installation Steps
Factory Defaults; Complete Set up and Installation
Standard Bracketry
Specifications Table
Troubleshooting
VARIO2 i6
VARIO2 w4
VARIO2 i4
VARIO2 w2
VARIO2 i2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Raytec VARIO2 Lite Series
Summary of Contents for Raytec VARIO2 Lite Series
- Page 1 LITE Installation Guide VARIO2 w16 VARIO2 i16 VARIO2 w8 VARIO2 i8 VARIO2 i6 VARIO2 w4 VARIO2 i4 VARIO2 w2 VARIO2 i2 Contents Page 1-2 Box Contents and Safety Information Page 2 Installation Steps Page 3 Factory Defaults; Complete Set up and Installation Page 5 Standard Bracketry Page 6...
-
Page 2: Safety Information
For VAR2-LTE-w2-1, VAR2-LTE-w4-1, VAR2-LTE-w8-1 and VAR2-LTE-w2-2, VAR2-LTE-w4-2 variants hazard distance is 1500mm. For VAR2-LTE-w16-1 and VAR2-LTE-w4-3, VAR2-LTE-w8-2/-3 variants hazard distance is 1840mm. Eye Safety: Other Wavelengths - Contact Raytec. The Illuminator is Class lll for insulation Illuminators are suitable for use Outdoors and Indoors Installation Steps VARIO2 LITE is factory set and delivered with a 35˚... -
Page 3: Factory Default Set-Up
IMPORTANT NOTE: Ensure base plate is securely located, the gasket is correctly located and the screws correctly fastened to ensure and maintain IP66 rating of the product. raytecled.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990... - Page 4 Step 5. Photocell following output (White & Yellow) Volt free output - normally open (day) to normally closed (night). Connect direct to camera if required to control switch over of day/night cameras. raytecled.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990...
-
Page 5: Standard Bracketry
Supplied with the Product (Model Dependant) (not to scale, dimensions rounded to nearest mm) VARIO 2 series VARIO 4/6 series 56mm 52mm VARIO 8 series VARIO 16 series 75mm 53mm Raytec Global Tel: +44 (0) 1670 520055 raytecled.com Americas Tel: +1 613 270 9990... - Page 6 For i6; w4 the supply to the units should be limited to/ fused at 3.15A • For i4; i2; w2 the supply to the units should be limited to/ fused at 1.6A For IR940nm Distances / Information contact Raytec raytecled.com Raytec Global Tel: +44 (0) 1670 520055...
- Page 7 (zero volt or TTL) is applied and correctly wired Step 3: Set up camera, lens, and illumination • Check model number to Raytec performance specification to ensure required distance is achievable; • Check orientation of unit and ensure it is pointing in correct direction •...
- Page 8 Illuminator shall be disposed of and re-cycled where possible.) Raytec Warranty All Raytec luminaires are provided with an industry leading 5 year warranty and have an expected useful life in excess of 10 years.
Need help?
Do you have a question about the VARIO2 Lite Series and is the answer not in the manual?
Questions and answers