Raytec VARIO2 iPPoE Series Quick Setup Instructions Manual
Hide thumbs
Also See for VARIO2 iPPoE Series:
- Full installation and setup manual (60 pages) ,
- Installation manual (36 pages) ,
- Instructions manual (16 pages)
Table of Contents
Advertisement
Quick Links
2 iPPoE
Quick Setup Instructions
VARIO2 iPPoE Series
Installation by suitably trained and qualified personnel only
Suitable for Internal and External Applications
Box Contents
VARIO2 IP PoE Illuminator - Infra-Red (IR) or White-Light (WL)
35° x 10° beam angle IHD ; 60° x 25° beam angle IHD
Waterproof RJ45 connector
Accessories (optional):
80° x 30° beam angle IHD
120° x 50° beam angle IHD
System requirements: A PC running Windows with network
access running a modern web browser
Full detailed instructions available from the Raytec website
Advertisement
Table of Contents
Related Manuals for Raytec VARIO2 iPPoE Series
Summary of Contents for Raytec VARIO2 iPPoE Series
- Page 1 35° x 10° beam angle IHD ; 60° x 25° beam angle IHD Waterproof RJ45 connector Accessories (optional): 80° x 30° beam angle IHD 120° x 50° beam angle IHD System requirements: A PC running Windows with network access running a modern web browser Full detailed instructions available from the Raytec website...
-
Page 2: Safety Information
Product Introduction VARIO2 IP PoE is a Network Illuminator designed to connect to a suitable network and is provided with an integrated Web Interface. The Raytec DiscoMan Tool allows for easy identification and connection to the illuminator or you can connect directly to the illuminator via its IP address. - Page 3 External Input (to act as a telemetry, trigger input, volt free or TTL) and an External Output (volt free output). It also benefits from Raytec’s interchangeable lens system so that the correct angle of illumination can always be achieved easily.
-
Page 4: Basic Steps
STEP 3: Physical Installation (Pg. 9-10) Adjust interchangeable lens if required. Fix to wall, pole or camera unit using U bracket provided or other Raytec bracketry. IMPORTANT: Ensure illuminator is rated to provide required viewing distances and select correct angle Ensure illuminator is orientated in the correct direction rayteccctv.com... - Page 5 STEP 4: Change IP address and connect to the illuminator (Pg. 11) We recommend the easiest and fastest way to identify and connect to illuminators is using the Raytec DiscoMan Tool where the IP address can be altered IMPORTANT: We recommend Raytec DiscoMan Tool as the easiest way to establish communication.
- Page 6 Ensure you make a waterproof connection to the RJ45 as shown below. Ensure the connector is waterproof and sealed after the connection is made. To illuminator RJ45-RJ45 connector To Network rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990...
- Page 7 To allow the VAR2-IPPoE 8 size product to be compatible with a large range of PSE devices the switch can be configure as follows rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990...
- Page 8 To change the switch setting, turn OFF the power to the illuminator, remove the baseplate and access the switch as shown. Baseplate fixing screws: Torque 0.6Nm Detection Resistance Selection Switch rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990...
- Page 9 The angles available as standard are: 10°x10° (NO lens / diffuser in place), 35°x10° and 60°x25°. Other angles are available to order: 80°x30° and 120°x50°. Baseplate fixing screws: Torque 0.6Nm rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990...
-
Page 10: Installation
• Use for connecting external input and external output as required To maintain the IP rating of the product, any cable not in use must be waterproofed and terminated appropriately. rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990... -
Page 11: Connecting To The Network
We recommend the easiest and fastest way to identify and connect to illuminators is using the Raytec DiscoMan Tool where the IP address can be altered ( DHCP enabled as standard). Using the Raytec DiscoMan Tool avoids the need to have the computer and illuminator in the same network range to alter the IP address and allows multiple lamps to be setup at once. - Page 12 The illuminator responds to multicast messages - and therefore does not need to have a valid IP address in the same network range for the Raytec DiscoMan Tool to find it. But it does require a valid IP address for connection and communication.
- Page 13 The Raytec DiscoMan Tool allows you to:- • Discover all illuminators on the network – illuminators do not need a valid IP address to be discovered • Alter IP address of illuminators – the illuminators must have a valid IP address to allow communication •...
- Page 14 Override is only available when the illuminator mode is set to Local, HTTP + Local or VMS + Local. To operate the illuminator via a VMS or third party application that uses the Raytec API, then the illuminator mode should be set to VMS or VMS + Local. In VMS mode the illuminator will ignore Photocell and External Input triggers and respond only to valid VMS commands.
-
Page 15: Factory Defaults
Commands command command Illuminator Mode on Trigger Power (%) 100% 100% Duration All night Duration of Input Soft Start Deterrent Pattern = SOS Frequency = Slow rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990... -
Page 16: Advanced Settings
All web pages have the following information in the header bar Model Type / Lamp Name / Group Name Home page User has access to Home Page and Diagnostics pages. Admin has access to all pages. rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990... - Page 17 Software Update Indicates current software / firmware version. Ability to upload updated software / firmware version. Log Off We recommend logging off illuminator after every session rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990...
- Page 18 The illuminator will respond to a standard Ping command sent to its valid IP address. For the ping command to work the illuminator and computer must reside in the same network range. rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990...
- Page 19 / switch to which the illuminator is connected and that the wiring is compatible with T-568B wiring standard. • If the illuminators are correctly wired to the network, run the Raytec DiscoMan Tool and try to discover the illuminator on the network.
- Page 20 Raytec Global (excluding Americas) Raytec Americas Tel: +44 (0) 1670 520055 Tel: +1 613 270 9990 sales@rayteccctv.com ussales@rayteccctv.com Raytec Ltd. Raytec Systems Inc. Unit 15 Wansbeck Business Park, Rotary Parkway 800-300 Terry Fox Drive, Ottawa, Ontario Ashington, Northumberland, NE63 8QW, United Kingdom 2K 0E3, Canada rayteccctv.com...