Cut Sheets Printable Area; Turning Off The Power Using Power Off Timer - Epson SureColor T3000 User Manual

Cut Sheets Printable Area

When printing borderless on the left and right, the left and right margins are 0 mm.
(Borderless printing is not available with poster board.)
The arrow in the illustration indicates the direction of the ejected paper.

Turning Off the Power Using Power Off Timer

The printer offers the following two power management options:
Sleep mode
O
The printer enters sleep mode when there are no errors, no print jobs being received,
and no control panel or other operations performed. When the printer enters sleep
mode, the control panel's screen turns off and the internal motors and other parts
switch off to consume less power.
Press any button in the control panel to reactivate the display. However, under these
conditions, the screen display turns off again after 30 seconds if no operations are
performed. The printer only exits sleep mode and is completely restored to normal
operation when a print job is received or the cover is opened or another hardware
operation is performed. The delay before the printer enters sleep mode can be selected
from values between 5 and 180 minutes. At default settings, the printer enters sleep
mode if no operations are performed for 15 minutes. The delay can be changed from
the Setup menu (see "Setup menu" on page 175).
Note:
When the printer enters sleep mode, the control panel's screen goes blank as if the power
has been turned off, but the P light remains lit.
8.3 ~ 17 inches
(210 ~ 432 mm)
0.5 inches (14 mm)
0.1 inches (3 mm)
Basic Operations 83