Turning Off The Power Using Power Off Timer - Epson SC-B6000 User Manual

SC-B6000 Series User's Guide
Roll Paper Margin
Parameter
Top15mm/Bottom150mm
3mm
15mm
*1 If Normal is selected along with any of the
following paper types under Select Paper Type in
the Paper menu, the value of
Premium Glossy 250/Premium Semigloss 250/
Premium Luster 260/Premium Semimatte 260
*2 If Normal is selected, and Auto Cut is turned Off
in the Setup menu, the value of
c
Important:
❏ Printing is distorted when the trailing edge of
the roll paper comes off the core. Make sure the
trailing edge does not come inside the printing
area.
❏ The print size does not change even when the
margins are changed.
Basic Operations
Margin Values
A
= 15 mm
C
= 150 mm
B, D
= 3 mm
A, B, C, D
= 3 mm
A, B, C, D
= 15 mm
A
is 20 mm.
C
is 150 mm.
38
Turning Off the Power
Using Power Off Timer
The printer offers the following two power management
options.
❏ Sleep mode
The printer enters sleep mode when there are no
errors, no print jobs being received, and no control
panel or other operations performed. When the
printer enters sleep mode, the control panel's screen
turns off and the internal motors and other parts
switch off to consume less power.
Press the P button to exit sleep mode and return to
the normal running state. The delay before the
printer enters sleep mode can be selected from
values between 5 and 240 minutes. At default
settings, the printer enters sleep mode if no
operations are performed for 15 minutes. The delay
can be changed from the Setup menu. U
menu" on page 47
Note:
When the printer enters sleep mode, the control
panel's screen goes blank as if the power has been
turned off, but the P light remains lit.
❏ Power Off Timer
The printer is equipped with a Power Off Timer
option that automatically turns the printer off if no
errors occur, no print jobs are received, and no
control panel or other operations are performed for
a set period of time. The delay before the printer
turns off automatically can be selected from values
between 1 and 24 hours in increments of 1 hour.
At default settings, the printer turns off
automatically if no errors occur, no print jobs are
received, and no control panel or other operations
are performed for eight hours. Power Off Timer
settings can be adjusted from the Setup menu. U
"Setup menu" on page 47
About Power Management
You can adjust the time before Power Management is
applied. Any increase will affect the printer's energy
efficiency. Please consider the environment before
making any change.
"Setup