Table of Contents
Advertisement
The gasket seal may be improved with a simple latch mechanism adjustment:
1.
Unscrew the nut (A).
2.
Remove the door latch (B) and the key path pin (C).
3.
Remove or add one washer (D) as needed. Keep the removed washer for future adjustment.
4.
Re-install the key path pin (C) in the key-way and slide the latch (B) along it.
5.
Secure with the nut (A).
D
C
B
A
Figure 20: Removing the door latch
5.1.3 Replacing the Door Gasket
It is important to maintain the gasket in good condition. After a year or more of use, the door
gasket will compress and become hard, which may allow air to leak. The condition of the door
seal can be verified by closing and latching the door on a strip of paper. The test must be
performed all around the door. If the paper slips out easily anywhere, it is time to replace the
gasket.
Figure 21: Door gasket seal verification
Installation and Operation Manual - Solution 2.3
It is important to replace the gasket with
another having the same diameter and
density to maintain a good seal.
Page 27
Advertisement
Table of Contents
