Brother 882-W83 Operation Manual page 120

ERROR MESSAGES
The safety device was activated since the main
16 shaft motor was heated. Is the thread tangled?
The safety device was activated since the main
17
shaft motor seized. Is the thread tangled?
The safety device was activated since the needle
position sensor malfunctioned.
18
There is no needle plate cover. Attach a needle
19
plate cover.
This file cannot be used.
20
This file exceeds the data capacity and cannot be
21 used. Use a suitable size file.
This USB media cannot be used.
22
USB media error
23
118
Error messages Cause/solution
This message is displayed when the temperature of the motor increases,
activating the safety device. Wait until the temperature decreases. If the error
persists, contact your nearest authorized Brother dealer.
This message is displayed when the motor locks due to tangled thread or for
other reasons related to thread delivery.
This message is displayed when an error in the needle position sensor is
detected, activating the safety device. Turn the machine off, then on again. If
the message continues to appear, the machine may be damaged. Contact
your nearest authorized Brother dealer.
This message is displayed when the needle plate cover is not attached.
This message appears if the file format is incompatible with this machine.
Check the list of compatible file formats. (page 119)
This message is displayed when the file size exceeds the data capacity of
the machine.
Confirm the file size and format. (page 119)
This message is displayed when you try to use incompatible media.
For a list of compatible USB media, visit https://s.brother/cpeag/.
This message is displayed when an error occurs with the USB media.
For a list of compatible USB media, visit https://s.brother/cpeag/.