Table of Contents
Advertisement
e
Select the desired pattern from the desired category.
And then touch
1
1 Couching patterns
2 Fill couching embroidery font
f
Touch
to lock all keys and buttons, and then
raise the presser foot lever.
g
Attach embroidery couching foot "Y".
CAUTION
• When using the embroidery couching foot
"Y", make sure the machine is in embroidery
mode. Otherwise, the needle will strike the
embroidery couching foot, causing the needle
to break and possibly causing injury.
h
Rotate the handwheel and check that the needle is in
the left half of the hole in embroidery couching foot
"Y".
If the needle is not in the left half, use the disc-shaped
screwdriver to turn the screw of embroidery couching
foot "Y" to adjust the position of the embroidery foot.
Turn the screw toward you to move the embroidery foot
to the right. Turn the screw toward the back to move the
embroidery foot to the left.
After making adjustments, rotate the handwheel and
check that the needle does not touch the presser foot.
.
2
EMBROIDERY APPLICATIONS
i
Attach the spool stand (sold separately) to the
machine.
At this time, do not raise the telescopic thread guide
shaft.
j
Insert the yarn guide for embroidery couching into the
slot on the top left of the machine.
k
Pass the yarn through the telescopic thread guide and
the yarn guide (1) to (2).
1
2
Note
• Pull off an appropriate amount of yarn from the ball
so that the yarn does not become taut.
• Make sure that the yarn does not become
entangled as you work.
3
85
Advertisement
Table of Contents
