Brother 882-W83 Operation Manual page 17

 Wireless LAN Settings
9
1 Enable/Disable the wireless LAN function (page 19).
2 Shows the connected SSID.
3 Set the machine to connect wireless LAN function.
4 Shows the machine name used on the wireless network.
5 Change the machine name used on the wireless
network.
6 Check the wireless LAN status.
7 Display other menus.
8 Reset network operations.
9 Display the introduction to the applications. Touch the
key of the app whose information you want to display.
On smart devices with a QR reader app installed, scan
the QR code to display a screen that shows how to
install the app.
1
2
3
4
5
6
7
0 If there is a new update program, download the update
8
A Display update program information. (page 121)
B Register the Artspira app. (page 108)
 Setting the [Eco Mode] and the [Shutoff
Support Mode]
You can save the machine power by setting the [Eco
0
Mode] and the [Shutoff Support Mode].
If you leave the machine turned on without using it for the
A
set period of time, the machine enters in each mode.
Touch
Mode]. (page 13)
[Eco Mode];
Machine will enter a sleep mode after the set period of
time. Touch the screen or press the "Start/Stop" button to
continue operating.
[Shutoff Support Mode];
Machine will enter the lower power mode after the set
period of time. Turn the machine off and then back on to
restart operating.
• If you turn off the machine while the machine is in
the [Eco Mode] or the [Shutoff Support Mode], wait
B
for about 5 seconds before turning on the machine
again.
• For details on condition of the [Eco Mode] and
[Shutoff Support Mode], refer to
"SPECIFICATIONS" on page 119.
My Stitch Monitor: The machine's embroidering status
can be monitored from your smart device. For details,
refer to "MY STITCH MONITOR APP" on page 106.
My Design Snap: You can position your embroidery
designs on the fabric, by capturing image of the hooped
fabric and sending the image to your machine. For
details, refer to "MY DESIGN SNAP APP" on page 107.
Artspira: You can transfer content published on the app
to the embroidery machine and enjoy creating original
works using the functions on the app.
file. (page 121)
to display [Eco Mode] and [Shutoff Support
Memo
LCD SCREEN
1
15