Cisco 8600 Series Hardware Installation Manual page 68

Connecting the DC-Input Wires
Figure 54: Remove the Nuts for Grounding
Step 5
Attach the lug to the two posts, secure with the two nuts, and tighten with the torque driver. The fastening
torque is between 2.0 and 2.8 Nm. Do not overtorque.
Note
Figure 55: Tighten the Nuts
Hardware Installation Guide for Cisco 8600 Series Routers
62
Always use a torque driver when you have to tighten nuts; it prevents you from overtightening
them.
Powering on the Router