Table of Contents
Advertisement
Replace Chassis Components
Warning
Statement 1090 Installation by Skilled Person
Only a skilled person should be allowed to install, replace, or service this equipment. See statement 1089 for
the definition of a skilled person.
Warning
Statement 1091 Installation by an Instructed Person
Only an instructed person or skilled person should be allowed to install, replace, or service this equipment.
See statement 1089 for the definition of an instructed or skilled person.
Warning
Statement 1073 No User-Serviceable Parts
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Warning
Statement 1029 Blank Faceplates and Cover Panels
Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages
and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other
equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all
cards, faceplates, front covers, and rear covers are in place.
Warning
Statement 1034 Backplane Voltage
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when
servicing
Warning
Statement 1051 Laser Radiation
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or
view directly with optical instruments.
Before you begin:
Before replacing a Switch Card (SC), you must perform a graceful shutdown of the card to avoid disk corruption.
Use one of the following procedures to perform graceful shutdown of the card:
• unscrew the captive screws and open ejector handles to trigger auto-shutdown of the card, and then verify
that the Status LED is in Off state.
• use the shutdown location location command in admin EXEC mode to shutdown the card. Then use
the show platform command to verify that the Status LED is in Off state.
Hardware Installation Guide for Cisco 8600 Series Routers
Replace a Switch Card
105
Advertisement
Table of Contents
