Table of Contents
Advertisement
13 | Online Measurement and Calibration
74 / 136
3.
Click on the 'Add' button for folders in the upper left corner.
In the menu for sheets, you will find buttons to add, delete and rename new sheets
4.
To change between different sheets, click on the tabs on the bottom of the 'Calibra-
tion/Measuring' window.
Tabs to switch between sheets
To add an element to a measurement sheet, perform the following steps:
5.
Drag a measurement element from the Toolbox and drop it on the measurement
sheet.
6.
Select the desired measurement channel from the 'Data' area and drop it on the
measurement element.
If the VCU MS 50.4 shows the green status, the value is displayed.
Vehicle_Control_Unit_VCU_MS_50.4_Manual
Drag + Drop
Bosch Motorsport
Advertisement
Table of Contents
