8 | Starting Up
26 / 136
As we did not define global start conditions, recording starts immediately.
5.
Start the WinDarab software.
6.
Disconnect the VCU MS 50.4 network cable.
7.
Click on the 'Read Data from Logging Device' icon.
8.
Choose your logger and click 'OK' when done.
Click
'read data from
logging device'
The 'Data Logger Import' dialog opens. Refer to the WinDarab V7 manual for instruc-
tions on how to use the 'Data Logger Import' dialog and for more detailed descrip-
tions and instructions.
9.
Choose the device and the IP address for the device.
Vehicle_Control_Unit_VCU_MS_50.4_Manual
Bosch Motorsport