Bosch MS 50.4 Manual page 112

16 | Lap Trigger
16.4.1 Sub trigger mode
16.4.2 Distance mode
112 / 136
Channels for display
To display segment times use the following channels:
Channel
Laptrigger_lapdiff
Laptrigger_lapdiffb
Laptrigger_lapseg_dlast
Laptrigger_lapseg_dbest
Using main trigger (20 ms pulse) at Start-Finish-Line. 3 sub triggers (40 ms pulse) posi-
tioned at 1,000 m, 2,000 m and 3,000 m.
To deactivate sub trigger mode uncheck box.
Define settings for lap timing
(main trigger).
Define settings for sub trigger.
Not applicable with a GPS lap trigger.
Sub Trigger
Sub Trigger
Main Trigger
The sub trigger mode cannot be used with the GPS lap trigger.
Using main trigger (20 ms pulse) at Start-Finish-Line.
Set 'Mode' to 'Distance' and enter desired segment distances.
Segment time is automatically calculated at each segment. Time difference to last lap and
fastest lap is automatically calculated at each segment.
To deactivate distance mode set 'Mode' to 'None'.
Vehicle_Control_Unit_VCU_MS_50.4_Manual
Function
Time difference between finished lap and last lap
Time difference between finished lap and best lap
Difference of lap segment time compared to last lap
Difference of lap segment time compared to best lap
Sub Trigger
Bosch Motorsport