Table of Contents
Advertisement
4.14 Scale Adjustment Page
The next three parameters are only included if the position feedback facility is selected.
Fb–rSt
Fb–OFS
Fb–SPN
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Position Feedback Scale Adjustment Reset
no
Set to
offset and span adjustments to their nominal value.
is displayed to indicate that these parameters have been
reset.
Position Feedback Offset Adjustment
––––
Proceed as for
and apply the correct input for the spot calibration
required. Ratio and bias settings are ignored.
Set the value required. The decimal point position is set
automatically. For resistance inputs use the external
connections to drive the valve to the fully closed position.
Adjust
Position Feedback Range Zero
Feedback Page
value in
within the offset bandwidth of ±10%.
Position Feedback Span Adjustment
––––
Proceed as for
and apply the correct input for the spot calibration
required. Ratio and bias settings are ignored.
Set the value required. The decimal point position is set
automatically. For resistance inputs use the external
connections to drive the valve to the fully open position.
Adjust
Position Feedback Range Full Scale
Position Feedback Page
adjust the value in
frame to bring it within the span bandwidth of ±10%.
Return to the top of the
and press
to reset the position feedback
YES
Process Variable Offset Adjustment
or
to bring the value displayed to that set in
. If this value cannot be reached, adjust the
Position Feedback Range Zero
Process Variable Span Adjustment
or
to bring the value displayed to that set in
. If this value cannot be reached,
Position Feedback Range Full Scale
Scale Adjustment Page
4 CONFIGURATION...
frame in the
Set Up Position
frame to bring it
frame in the
.
dONE
frame
frame
Set Up
47
Advertisement
Table of Contents
