Table of Contents
Advertisement
...4 CONFIGURATION
...4.2 Set Points Page
2nd–SP
rEMOtE
d U A L
dSP–HI
1000
NONE
or
rEMOtE
dSP–LO
0
d–SPt
500
NONE
rSPtrK
rEMOtE
YES
rSP–HI
1000
8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Second Set Point Type
This frame enables the setting up of a Second set point in
addition to the Local set point.
Select the second set point type,
point),
(Dual set point) or
dUAL
point).
Dual Set Point High Limit
This is the maximum value to which the Dual set point can
be adjusted.
Select the value required. The decimal point position is set
automatically.
Dual Set Point Low Limit
This is the minimum value to which the Dual set point can
be adjusted.
Select the value required. The decimal point position is set
automatically.
Adjustable Dual Set Point Value
Set the value required, restricted to the limits set in
and
Point High Limit
Dual Set Point Low Limit
Advance to
Set Point Type Selection
Remote Set Point Tracking Enable
If
Remote Set Point Tracking
in Remote mode the Local set point tracks the remote set
point. When the controller is in
mode the local set point limits can be exceeded. If the local
set point is outside of its limits when the tracking mode is
disabled, the Local set point value can only be adjusted
towards its limits. Once within the limits they apply as
normal. With Remote set point tracking enabled; if the
controller is put into Manual mode, the set point reverts
from remote to Local.
Select
to enable or
YES
Remote Set Point High Limit
This is the maximum value to which the Remote set point
can be adjusted.
Select the value required. The decimal point position is set
automatically.
Continued on next page.
(no Second set
NONE
(Remote set
rEMOtE
above.
on page 10.
is enabled and the controller is
Remote Set Point Tracking
to disable.
no
Dual Set
Advertisement
Table of Contents
