Table of Contents
Advertisement
OS Series Handheld DSO & DMM
8.17 Data Transmission
For the operation of data transmission, please execute the following steps:
1.
Press MENU key, display the function menu on the right side of the screen.
Press MENU ▲ or MENU ▼ key to select DISP SET.
2.
3.
Press F4 key, select the Bitmap or Vectors for data transmission.
4.
Use a data line to connect the oscilloscope and the PC.
5.
Open the software that had been installed completely.
6.
Setting the parameter under the use's manual, and then starts data transmission.
8-Advanced Function of Oscilloscope
Figure 68: Window
75
Advertisement
Table of Contents
