Download Print this page

Advertisement

Quick Links

General Specifications
l Maximum Voltage between
any Terminals and Grounding:
l
Fused Protection for
DMM8060/8061
l
Fused Protection for 10AInput Terminal:
DMM8060/8061
l Maximum Display: Digital: 3999
l Measurement Speed: Updates 3 times/second.
l
Temperature: Operating : 0
l Relative Humidity:
l Altitude: Operating: 2000 m.
Storage : 10000 m.
l Battery Type: One piece of 9V (NEDA1604 or 6F22 or
006P).
l Battery Deficiency: Display
l Dimensions (HxWxL): 177 x 85 x 40 mm.
l Weight: Approximate 300g (battery included).
l Safety/Compliances: IEC61010 CAT.III 1000V,
CAT.IV 600V overvoltage and double insulation standard.
l Certifications:
1000V.
Glass fuse, 0.5A, 250V, fast type, 5x20mm.
Glass fuse, 10A, 250V, fast type, 5x20mm.
o
o
C~40
o
Storage : -10
C~50
o
:
75% @ 0
C - 30
,
UL & CUL
26
Input Terminal: Model
o
o
C (32
F ~104
F).
o
o
o
C (14
F~122
F).
o
o
C; 50% @ 31
o
C - 40
C;

Advertisement

loading

Summary of Contents for TECPEL DMM8060

  • Page 1 Maximum Voltage between any Terminals and Grounding: 1000V. Fused Protection for Input Terminal: Model DMM8060/8061 Glass fuse, 0.5A, 250V, fast type, 5x20mm. Fused Protection for 10AInput Terminal: DMM8060/8061 Glass fuse, 10A, 250V, fast type, 5x20mm. l Maximum Display: Digital: 3999 l Measurement Speed: Updates 3 times/second.
  • Page 2: Accuracy Specifications

    750V AC rms 100mV 400V continuous. 750V (1.2%+5) Remarks: l Input impedance 10M l Model DMM8060: displays effective value of sine wave (mean value response). Model DMM8061: displays true rms value. l Frequency response 40Hz~400Hz. C. Resistance Overload Range Resolution...
  • Page 3 Accuracy Specifications (2) D Continuity Test Overload Range Resolution Accuracy Protection 1000Vp 400.0 Approximate 100 Remarks: l Buzzer beeps continuously. l Open circuit voltage approximate 0.45V. E. Diode Test Range Resolution Overload Protection Diode 1000Vp Remarks: l Open circuit voltage approximate 1.48V. l Displays approximate forward voltage drop reading 0.5V~0.8V.
  • Page 4 Accuracy Specifications (3) H.Temperature (Model DMM8060/8061) Overload Protection: Glass fuse 0.5A, 250V, fast type, 5x20mm. I. DC Current 400 A 0.1 A 0.5A, 250V, fast type Glass fuse, 5x20 mm. 10A, 250V, fast type Glass fuse, 5x20 mm. Remarks: l 4A & 10A Range: For continuous measurement 10 seconds and interval not less than 15 minutes.
  • Page 5 0.5A, 250V, fast type Glass fuse, 5x20 mm. 10A, 250V, fast type Glass fuse, 5x20 mm. Remarks: Model DMM8060 : displays effective value of sine wave (mean value response). Model DMM8061: displays true rms value. l 4A & 10A Range:...
  • Page 6: Maintenance

    To prevent damage or injury, install ONLY replacement fuses with identical amperage, voltage, and speed ratings. To test the fuse: 1. Model DMM8060: Set the rotary switch to and pressBLUE button to select 2. Plug a test lead into the terminalHzV and touch the probe...
  • Page 7 l If the Meter beeps, the fuse is good. l If the display shows , replace the fuse and test again. l If the display shows any other value, have the Meter serviced and contact your dealer immediately. If the Meter does not work while the fuse is all right, send it to your dealer for repair.
  • Page 8 D. Replacing the Fuses (see figure 13) (figure 13) Warning To avoid electrical shock or arc blast, or personal injury or damage to the Meter, use specified fuses ONLY in accordance with the following procedure. To replace the Meter’s fuse: Press the POWER to turn the Meter off and remove all connections from the terminals.
  • Page 9 Rejoin the battery compartment and the case top, and reinstall the screw. 7. Rejoin the case bottom and case top, and reinstall the 2 screws and 2 rubber feet. Replacement of the fuses is seldom required. Burning of a fuse always results from improper operation.
  • Page 10 RS232C Serial Port (Model DMM8061) A.RS232C Port Cable The Meter Computer D-sub D-sub D-sub Pin Name 9 Pin Female 25 Pin Female B.Setting of RS232C Serial Ports Default of RS232C serial port for communication is set as: Baud Rate 2400 Start bit 1 (always 0) Stop bit...

This manual is also suitable for:

Dmm8061