Table of Contents
Advertisement
OS Series Handheld DSO & DMM
Insert the black lead into the COM banana jack input and the red lead into the V/Ω/C
2.
banana jack input.
3.
Connect the red and black test leads to the resistor. The resistor value readings are shown on
the screen in Ohm.
Now, you can see a screen that looks like the following figure 21.
7.4.2 Measuring Diode
To make a measurement on the diode, do the following:
1.
Press the R key and R appears at the top of the screen.
2.
Press SET key until the following is displayed on the screen
Insert the black lead into the COM banana jack input and the red lead into the V/Ω/C
3.
banana jack input.
4.
Connect the red and black leads to the resistor and the diode resistor readings are displayed
on the screen in V.
Now, you can see a screen that looks like the following figure 22.
Figure 21: Resistance Measurement
30
7-Using the Multimeter
.
Advertisement
Table of Contents
