Table of Contents
Advertisement
OS Series Handheld DSO & DMM
Decrease
－－＞
1/2
Save
Load
－－＞
2/2
Record the waveform as follows:
1.
Press the MENU key and the function menu appears at the right of the screen.
Press the MENU ▲ or MENU ▼ key to select RECORD and five options are displayed at
2.
the bottom of the screen.
3.
Press the F1 key to select the Record mode.
4.
Press F2 and set the End frame at 300 (select the direction as Increase or Decrease in the
second menu before step4).
5.
Press F4 and set the time Interval to 1.00ms.
6.
Press F5 to enter into the second menu.
7.
Press F1 and select OFF to stop refreshing waveforms.
8.
Press F5 to back up to the first menu.
9.
Press F3 and select Play to operate.
Shown as Fig.58 and Fig.59
The value decreases from the set start frame to the end frame
To next menu
Save recorded waveform to internal memory location.
Recall recorded waveform from internal memory location.
Back to previous menu.
Fig.58：the first page of the record
65
8-Advanced Function of Oscilloscope
Advertisement
Table of Contents
