Table of Contents
Advertisement
OS Series Handheld DSO & DMM
If you want to measure voltage of Channel 1, you can do as the follows:
1.
Press MENU, the function menu will appear on the right of the screen.
Press MENU ▲ or MENU ▼ and choose AUTOSCALE, three options will show at the
2.
bottom of the screen.
3.
Press F1 and choose ON.
4.
Press F2 and choose HORI -VERT.
5.
Press F3 and
Figure 57: Autoscale Horizontal- Vertical multi-period waveforms
Note:
1. Entering into Autoscale function and
2. At the mode of Autoscale, the oscilloscope can self-estimate "Trigger mode" (Edge, Video,
and Alternate) and "Type" (Edge, Video). If now, you press "Trigger mode" or "Type", the
forbidden information will display on the screen.
3. At the mode of XY and STOP status, pressing AUTO SET to enter into Autoscale, DSO
switches to YT mode and AUTO status.
4. At the mode of Autoscale, DSO is always in the state of DC coupling and AUTO triggering.
In this case, the forbidden information will be showing when making Triggering or Coupling
settings.
Only show one or two periods
Show Multi-period waveforms
displays on the screen as figure 57:
○
A
flicker will be on the top left corner.
62
8-Advanced Function of Oscilloscope
Advertisement
Table of Contents
