TECPEL OS Series User Manual page 69

OS Series Handheld DSO & DMM
OFF
Increase
Direction
Decrease
－－＞
1/2
Note: Both the waveforms are recorded at record mode. If one channel is off when recording, the
channel data is not available at Playback mode.
Play back: Play back the recorded waveforms.
Play back menu list：
Menu Setting
Loop
Play mode
Single
Play
Operate
Stop
Interval 1ms-20s
－－＞
1/2
Start Frame 1-1000
Cur frame 1-1000
End frame 1-1000
Increase
Direction
Decrease
－－＞
2/2
Note: the Run/Stop button can also replay or continue the waveform display.
Storage: Store recorded waveforms in non-volatile memory according to the setup frames.
Storage menu list：
Menu Setting
Start Frame 1-1000
End frame 1-1000
Direction Increase
The waveforms stop refreshing when recording.
The value increases from that of end frame to time interval
The value decreases from that of end frame to time interval
Back to previous menu.
Instruction
Set repeat play mode.
Set single time play mode.
Press to start playback.
Press to stop playing.
Set up interval value between frames.
To next menu
Set start frame.
Select current frame to be played.
Set End frame.
The value increases at the mode of setting start frame, cur frame and
end frame
The value decreases at the mode of setting start frame, cur frame and
end frame
Back to previous menu.
Instruction
Set first frame to be saved.
Set last frame to be saved.
The value increases from the set start frame to the end frame
64
8-Advanced Function of Oscilloscope