Configuring The Power Management Options - EXFO LTK-1 User Manual

Setting Up Your LTB-1

Configuring the Power Management Options

Configuring the Power Management Options
To help you get the optimum performance out of your unit, it comes with
predefined sets of parameters (plans) to manage power.
When you do not use the unit for a while, the display may be turned off to
save power. You can also configure the unit to go into sleep mode after the
specified duration has expired (see Turning Off Your Unit on page 22).
For all of these actions, you can set idle durations for AC adapter/charger
and battery operation. The values that you set are kept in memory even
when you turn the unit off.
Note: When the backlight is turned off and the
unit operation is not interrupted. Touch anywhere on the screen to return to
normal operation.
The table below identifies the predefined power plans.
High Performance
(selected by default)
Balanced
Power Saver
You can either modify one of the existing power plans or create one (based
on an existing power plan). It is always possible to revert to factory default
values for the predefined plans. You can delete custom power plans that
you no longer use, but not the predefined plans.
84
Power Plan
LED is lit and not blinking, the
Characteristics
Provides maximum power when you work
with your unit without optimizing the energy
consumption.
Provides extra power when your unit needs
it, and saves power when your unit
consumes less.
Optimizes the energy consumption, which
could be particularly useful when you
operate the unit on batteries.
LTB-1