Status Subsystem; Status Operation Register; Measure:trigger:delay; Measure:voltage - Rohde & Schwarz R&S LCX200COM User Manual

®
R&S LCX Series
MEASure:TRIGger:DELay <Trigger Delay>
Sets a delay time that elapses after a trigger event before the measurement starts.
Parameters:
<Trigger Delay>
Example:
Manual operation:

MEASure:VOLTage?

Queries the voltage value following next in the measurement.
Example:
Usage:

READ?

Queries the measurement results for measurement pair 2.
Example:
Usage:

READ:IMPedance?

Queries the impedance measurement results.
Example:
Usage:

11.15 STATus subsystem

This system contains the commands for the status reporting system, see
ter 10.2.4, "Status reporting
registers.

11.15.1 Status operation register

This system contains the commands for controlling the STATus:OPERation register
of the status reporting system.
User Manual 1179.2260.02 ─ 04
Range: 0 s to 60 s
Increment: 100 ms
*RST: 0 s
Default unit: s
See Example"Using the MEASure commands"
See "Trigger Delay" on page 78
See Example"Using the MEASure commands"
Query only
See Example"Acquiring measurement readings"
Query only
See Example"Acquiring measurement readings"
Query only
system", on page 149.
Remote control commands
STATus subsystem
on page 208.
on page 208.
on page 209.
on page 209.
Chap-
has no effect on the status
*RST
211