Error Messages On The Message Window - Konica Minolta bizhub C20X User Manual

Error Messages on the Message Window

Error message
ADMINISTERED BY
PC
PLEASE WAIT!
COMMUNICATION
ERROR (####)
Check Fax Mode
FAX DATA LOST
HUNG UP THE PHONE The receiver of the con-
LINE PROBLEM
CHECK LINE
Error Messages on the Message Window
All manuals and user guides at all-guides.com
Cause
This machine is access-
ing LSU or the Admin.
Mode of PageScope
Web Connection.
Communication is not
possible because of
some problem in the
machine.
Communication is not
possible because of a
problem with the
recipient/caller's fax
machine.
A fax error occurred
while an operation was
being performed in Copy
mode or Scan mode.
Data stored in the mem-
ory has been erased.
nected telephone is
lifted.
The telephone dialing
system or telephone
wiring system is not
set correctly.
The telephone cable
is not attached cor-
rectly.
Solution
Log off from PageScope Web
Connection.
Exit LSU.
If no operation is performed for
600 seconds, the main screen
appears.
Check the transmission results.
Press the Fax key to check the
error condition, and take appro-
priate measures.
Check the printed lost data
report. If transmission data was
erased, scan the transmission
data again. If received data was
erased, have the fax sent again.
Replace the receiver of the con-
nected telephone on the hook.
Check the telephone dialing
system or telephone wiring
system and use the appropri-
ate configuration menu to
make the correct settings.
Correctly connect the tele-
phone cable.
93