Table of Contents
Advertisement
11
SERVICE WORK ON THE CHASSIS
11.34
Removing the fuel tank
Danger
Fire hazard Fuel is highly flammable.
–
Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
–
Fuel in the fuel tank expands when warm and can escape if the tank is overfilled. See the notes on refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid contact between fuel and skin, eyes and clothing. Do not inhale fuel vapors. If fuel gets into your eyes, rinse immedi-
ately with water and contact a doctor. Wash affected skin areas immediately with soap and water. If fuel is swallowed, con-
tact a doctor immediately. Change clothing that has come into contact with fuel. Store fuel in a suitable canister according
to regulations and keep it out of the reach of children.
Main work
–
Remove all screws from the main silencer. Take off protection cap
tube
.
2
–
Pull the glass fiber yarn filling
–
Clean the parts that are to be reinstalled.
–
Mount the new glass fiber yarn filling
–
Slide outer tube
–
Insert protection cap
–
Mount and tighten all screws.
400256-10
Finishing work
–
Install the main silencer. (
x
Preparatory work
–
Remove the seat. (
Main work
–
Disconnect electric plug-in connection
–
Thoroughly clean plug-in connection
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the fuel
line clogs the injection valve.
101802-10
–
Disconnect the plug-in connection of the fuel line.
–
Mount wash cap set
Wash cap set (81212016000)
–
Remove the tube from the fuel tank breather.
101803-10
from inner tube
3
on the inner tube.
3
over the glass fiber yarn filling.
2
into the outer tube.
1
p. 47)
p. 44)
of the fuel pump.
1
of the fuel line using compressed air.
2
.
A
and outer
1
.
4
48
Advertisement
Table of Contents
