6
CONTROLS
6.8
Closing the filler cap
6.9
Cold start button
(All SX‑F models)
–
Mount filler cap
101765-10
(XC‑F)
–
Replace the filler cap and turn clockwise until the release button
place.
101766-10
The cold start button
The injection system extends the injection time if the engine is cold and the outside
temperature is low. The engine can only burn the increased fuel quantity if it receives
more air. It obtains more air by pulling the cold start button.
Possible states
The cold start button is activated – The cold start button is pulled out all the way.
•
The cold start button is deactivated – The cold start button is pushed in all the
•
way.
101767-10
and turn it clockwise until the fuel tank is tightly closed.
1
Info
Run the fuel tank breather hose
Info
Run the fuel tank breather hose
is fitted on the left on the throttle valve body.
1
without kinks.
2
1
without kinks.
2
13
locks in