17
SERVICE WORK ON THE ENGINE
17.4
Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Remove the oil filler plug
–
Add the same engine oil that was used when the motor was changed.
Engine oil (SAE 10W/50) (
Alternative 1
Engine oil (SAE 10W/60) (00062010035) (
Info
For optimal performance of the engine oil, do not mix different types of
101833-10
engine oil.
If appropriate, change the engine oil.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
with the O-ring from the clutch cover.
1
p. 94)
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
p. 94)
80