ABB TLE Series Installation Manual page 4

160 to 500 kva ul s2b
Table of Contents

Advertisement

4/62
Preface
Congratulations on your choice of a SG Series 160 to 500 Uninterruptible Power Supply (UPS).
It will keep you away from any trouble due to unexpected power problems.
This Installation Guide describes how to prepare the installation site, and it provides weight and dimensions
and procedures for moving, installing and connecting the UPS.
Please refer to the accompanying User Manual, which describes the function of the UPS module, the purpose
and location of the switches, the meaning of the system events related to the front panel indication and
provides procedures for starting and stopping the equipment.
While every care has been taken to ensure the completeness and accuracy of this manual, ABB assumes no
responsibility or liability for any losses or damages resulting from the use of the information contained in this
document.
Note!
TLE Series 160 to 500 is a Category C3 UPS Product (according to IEC 62040-2).
This is a product for commercial and industrial application in the second environment −
installation restrictions or additional measures may be needed to prevent disturbances.
We recommend that this manual be kept next to the UPS for future references.
If any problems are encountered with the procedures contained in this manual, please contact your ABB
Service Center before you proceed.
This document shall not be copied or reproduced without the permission of ABB.
Due to technical improvements, some of the information contained in this manual may be changed without
notice.
Safety instructions
Carefully read the safety instructions contained on the following page before the installation, start-up and
maintenance of the UPS, options and Battery.
Pay attention to the rectangular boxes included in the text:
They contain important information and warning concerning electrical connections and personnel safety.
Parallel System secured with "RPA – Redundant Parallel Architecture"
When included in the text, this symbol refers to operation needed only for the RPA
Parallel System.
TLE Series 160 to 500 UL S2B
UPS Installation Guide / REV-A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tle 500 ul s2bTle 160 ul s2bTle 200 ul s2bTle 225 ul s2bTle 250 ul s2bTle 300 ul s2b ... Show all

Table of Contents