JSI Vision-ADJUSTABLE HEIGHT DESK WITH RETURN Install Instructions page 3

Unit Top Installation
Set unit up per order. Drawer pedestal on one side and Return pedestal on opposite side. Slide the (2) top stretcher bar in place, do not lock in
place. Remove the drawers from the Drawer pedestal notice where each drawer is located . Align the Return pedestal and Drawer pedestal with
Modesty panel, lock cam and post (turn Clockwise) (6) places. Using a level to level Return pedestal, Drawer pedestal and Modesty Panel. Level-
er located on bottom of pedestals. Re-insert drawers.
LEVELER
Unit Layout Installation
Set top into place. Top filler assist panel will butt up to the Modesty panel inside face. Align return pedestal along side with top, should be 1/16"
top overhang. Secure (6) U-Brackets with #10 X 7/8 PHP screws (2) per bracket.
Note: There will be a 1" inset on wing end edge for pinch point relief.
1" INSET FOR PINCH
POINT RELIEF
8/26/2022
(6) CAM AND POST
ALIGNMENT
LEVELER
LEVELER
(6) U-BRACKETS
(2) PER LEG ASSEMBLY
Figure (E)
LEVELER
(4) CORNER
#10 X 7/8" PAN HEAD PHILIPS
(2) PER U-BRACKET (12 TOTAL)
Form No. INST-VS0013
(2) TOP STIFFNERS
Figure (F)
FILLER PANEL TOP ASSIST
FLUSH TO MODESTY PANEL
END PANEL REMOVED
FOR CLARITY
3